The hard drive I got was one of these:
http://www.seagate.com/www/en-us/products/laptops/momentus/momentus_7200.1/
Here are the relevant parts of my order from the Lenovo website:
7764CTO CTO THINKPAD X61 TABLET SERIES 27R0300 VBB INTEGR. FINGERPRINT SENSOR 42R9189 VBB INTEGR.WIFI WL 3RD ANTENNA 42V8010 VBB MS WIN VISTA BUSINESS 42X0661 SBB MW VISTABUS32 US ENGLISH 42X0466 SBB 12.1MV+MT XGA TFT L7500LV 41W2060 VBB 1GB PC2-5300 667MHZ 1DIMM 42X0133 SBB KEYBOARD US ENGLISH 42V9154 SBB 100 GB HDD,7200RPM 42V8193 SBB INTEL TURBO MEMORY 1GB 42T6741 SBB THINKPADX6TABLULTRABASE 42V9157 SBB DVDREC8XMAXDUALLAY,UBSLIM 62P6054 VBB INTEGR.BLUETOOTH PAN 42V8177 SBB INT.WIRE.WIFI/LINK4965AGN 42T6684 SBB THINKPADX60 TABSER8 SL 41W1787 SBB CPK NORTH AMERICA 27R1769 SBB PSTN CABLE 42X0511 SBB LPACK.US ENGLISH
42T6786 SBB BLUETOOTH W/ ANTENNA 42X0750 SBB CLEARPLATE 42X0757 SBB FCC LABEL 42X0732 SBB GEO LABEL US,WLAN,BT 41W1982 SBB LOGO PLATE 42X0727 SBB MT 7764 SYSTEM LABEL 42X1359 SBB MECH MISC PARTS 42V7973 SBB MS LABEL (VISTA BASIC) 42X1232 SBB NEWINTELLAB_DUALCORE/CEPRO 42V8063 SBB MS WAU ENGLISH NA-U MODELS 42X0557 SBB PCK+ULTRABASE 42V8300 SBB 1GB PC2-5300 DDR2 667MHZ 41C9170 THKPLUS TP 3YR PICKUP DEPOT
Here is the output of lspci:
00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 0c) 00:19.0 Ethernet controller: Intel Corporation Unknown device 1049 (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI #2 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) 00:1f.0 ISA bridge: Intel Corporation Mobile LPC Interface Controller (rev 03) 00:1f.1 IDE interface: Intel Corporation Mobile IDE Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation Mobile SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03) 02:00.0 Memory controller: Intel Corporation Unknown device 444e (rev 01) 03:00.0 Network controller: Intel Corporation Unknown device 4230 (rev 61) 05:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 05:00.1 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832 (rev 04) 05:00.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
Here is the output of lsusb (the docking station is attached, and a logitech mouse and a dell keyboard are attached to some usb ports):
Bus 006 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 003 Device 014: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 003 Device 015: ID 0a5c:2110 Broadcom Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 031: ID 413c:2105 Dell Computer Corp. Bus 001 Device 030: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver Bus 001 Device 029: ID 17ef:1000 Bus 001 Device 001: ID 0000:0000
Here is the output of dmesg after booting with the docking station attached:
Linux version 2.6.22-1-amd64 (Debian 2.6.22-3) (waldi@debian.org) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Sun Jul 29 13:54:41 UTC 2007 Command line: root=/dev/sda1 ro BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000099800 (usable) BIOS-e820: 0000000000099800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000be6b0000 (usable) BIOS-e820: 00000000be6b0000 - 00000000be6cc000 (ACPI data) BIOS-e820: 00000000be6cc000 - 00000000be700000 (ACPI NVS) BIOS-e820: 00000000be700000 - 00000000bf000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 153) 0 entries of 3200 used Entering add_active_range(0, 256, 779952) 1 entries of 3200 used end_pfn_map = 1048576 DMI present. ACPI: RSDP 000F6990, 0024 (r2 LENOVO) ACPI: XSDT BE6BD0DD, 0094 (r1 LENOVO TP-7S 1040 LTP 0) ACPI: FACP BE6BD200, 00F4 (r3 LENOVO TP-7S 1040 LNVO 1) ACPI Warning (tbfadt-0434): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] ACPI: DSDT BE6BD5DB, E5B5 (r1 LENOVO TP-7S 1040 MSFT 3000000) ACPI: FACS BE6E4000, 0040 ACPI: SSDT BE6BD3B4, 0227 (r1 LENOVO TP-7S 1040 MSFT 3000000) ACPI: ECDT BE6CBB90, 0052 (r1 LENOVO TP-7S 1040 LNVO 1) ACPI: TCPA BE6CBBE2, 0032 (r2 LENOVO TP-7S 1040 LNVO 1) ACPI: APIC BE6CBC14, 0068 (r1 LENOVO TP-7S 1040 LNVO 1) ACPI: MCFG BE6CBC7C, 003C (r1 LENOVO TP-7S 1040 LNVO 1) ACPI: HPET BE6CBCB8, 0038 (r1 LENOVO TP-7S 1040 LNVO 1) ACPI: SLIC BE6CBDF0, 0176 (r1 LENOVO TP-7S 1040 LTP 0) ACPI: BOOT BE6CBF66, 0028 (r1 LENOVO TP-7S 1040 LTP 1) ACPI: ASF! BE6CBF8E, 0072 (r16 LENOVO TP-7S 1040 PTL 1) ACPI: SSDT BE6E2697, 025F (r1 LENOVO TP-7S 1040 INTL 20050513) ACPI: SSDT BE6E28F6, 00A6 (r1 LENOVO TP-7S 1040 INTL 20050513) ACPI: SSDT BE6E299C, 04F7 (r1 LENOVO TP-7S 1040 INTL 20050513) ACPI: SSDT BE6E2E93, 01D8 (r1 LENOVO TP-7S 1040 INTL 20050513) No NUMA configuration found Faking a node at 0000000000000000-00000000be6b0000 Entering add_active_range(0, 0, 153) 0 entries of 3200 used Entering add_active_range(0, 256, 779952) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-00000000be6b0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 153 0: 256 -> 779952 On node 0 totalpages: 779849 DMA zone: 56 pages used for memmap DMA zone: 1025 pages reserved DMA zone: 2912 pages, LIFO batch:0 DMA32 zone: 10607 pages used for memmap DMA32 zone: 765249 pages, LIFO batch:31 Normal zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 0000000000099000 - 000000000009a000 swsusp: Registered nosave memory region: 000000000009a000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d6000 swsusp: Registered nosave memory region: 00000000000d6000 - 00000000000d8000 swsusp: Registered nosave memory region: 00000000000d8000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: bf000000:31000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 37896 bytes of per cpu data Built 1 zonelists. Total pages: 768161 Kernel command line: root=/dev/sda1 ro Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1596.000 MHz processor. Console: colour VGA+ 80x25 Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 3066908k/3119808k available (2009k kernel code, 52488k reserved, 946k data, 296k init) Calibrating delay using timer specific routine.. 3195.52 BogoMIPS (lpj=6391056) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12468744 Detected 12.468 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3192.12 BogoMIPS (lpj=6384254) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 Duo CPU L7500 @ 1.60GHz stepping 0a Brought up 2 CPUs migration_cost=15 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at f0000000 - f3ffffff ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: ACPI device : hid PNP0C01 pnp: ACPI device : hid PNP0A08 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0103 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid LEN0003 pnp: ACPI device : hid IBM3780 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0400 pnp: ACPI device : hid WACF008 pnp: ACPI device : hid ATM1200 pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:00' and the driver 'system' Time: hpet clocksource has been installed. pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xc0000-0xc3fff has been reserved pnp: 00:00: iomem range 0xc4000-0xc7fff has been reserved pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved pnp: match found with the PnP device '00:02' and the driver 'system' pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: dc100000-dfcfffff PREFETCH window: dfe00000-dfefffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: fc000000-fdffffff PREFETCH window: f8000000-f80fffff PCI: Bus 6, cardbus bridge: 0000:05:00.0 IO window: 00004000-000040ff IO window: 00004400-000044ff PREFETCH window: f4000000-f7ffffff MEM window: c0000000-c3ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-7fff MEM window: f8300000-fbffffff PREFETCH window: f4000000-f7ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:05:00.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 12582912 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 5498k freed Simple Boot Flag at 0x35 set to 0x1 audit: initializing netlink socket (disabled) audit(1188939337.056:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] Real Time Clock Driver v1.12ac hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:0a' and the driver 'serial' pnp: Res cnt 2 pnp: res cnt 2 pnp: Encode io pnp: Encode irq pnp: Device 00:0a activated. 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:08' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:09' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Freeing unused kernel memory: 296k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: SSDT BE6E1D72, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513) ACPI: SSDT BE6E2079, 061E (r1 PmRef Cpu0Cst 100 INTL 20050513) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT BE6E1CAA, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) ACPI: SSDT BE6E1FF4, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (55 C) ACPI: Thermal Zone [THM1] (55 C) Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:19.0 to 64 USB Universal Host Controller Interface driver v3.0 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:d3:ce:02:c9 SCSI subsystem initialized libata version 2.21 loaded. e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe226c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 4 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx pnp: the driver 'ide' has been registered ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ahci 0000:00:1f.2: version 2.2 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x1) don't match usb 1-1: device not accepting address 2, error -71 usb 5-4: new high speed USB device using ehci_hcd and address 3 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci ata1: SATA max UDMA/133 cmd 0xffffc2000065c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 1277 usb 5-4: configuration #1 chosen from 1 choice hub 5-4:1.0: USB hub found hub 5-4:1.0: 4 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 4 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST910021AS, 4.06, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST910021AS 4.06 PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:05:00.1 to 64 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda4 sd 0:0:0:0: [sda] Attached SCSI disk usb 1-1: configuration #1 chosen from 1 choice firewire_ohci: Added fw-ohci device 0000:05:00.1, OHCI version 1.10 ICH8M: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 16 ICH8M: chipset revision 3 ICH8M: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x18e0-0x18e7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... usb 5-4.1: new low speed USB device using ehci_hcd and address 4 usb 5-4.1: configuration #1 chosen from 1 choice usb 5-4.2: new low speed USB device using ehci_hcd and address 5 firewire_core: created new fw device fw0 (0 config rom retries) usb 5-4.2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB RECEIVER as /class/input/input1 input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.7-4.1 input: Dell Dell USB Keyboard as /class/input/input2 input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.7-4.2 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver hda: MATSHITADVD-RAM UJ-852, ATAPI CD/DVD-ROM drive hda: selected mode 0x42 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Attempting manual resume swsusp: Marking nosave pages: 0000000000099000 - 0000000000100000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input3 agpgart: Detected an Intel 965GM Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0xe0000000 Yenta: CardBus bridge found at 0000:05:00.0 [17aa:20c6] sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input4 Yenta: ISA IRQ mask 0x04b8, PCI irq 16 Socket status: 30000006 pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:0b' and the driver 'parport_pc' parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23 sdhci: SDHCI controller found at 0000:05:00.2 [1180:0822] (rev 21) ACPI: PCI Interrupt 0000:05:00.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.2 to 64 mmc0: SDHCI at 0xf8301800 irq 18 DMA iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 0.1.14ds iwl4965: Copyright(c) 2003-2007 Intel Corporation ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 iwl4965: Detected Intel Wireless WiFi Link 4965AGN ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 iwl4965: Tunable channels: 11 802.11bg, 13 802.11a channels wmaster0: Selected rate control algorithm 'iwl-4965-rs' Adding 5397800k swap on /dev/sda4. Priority:-1 extents:1 across:5397800k EXT3 FS on sda1, internal journal loop: module loaded device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com fuse init (API version 7.8) pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX e1000: eth1: e1000_watchdog: 10/100 speed: disabling TSO NET: Registered protocol family 10 lo: Disabled Privacy Extensions ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [AC] (on-line) input: Power Button (FF) as /class/input/input5 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input6 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input7 ACPI: Sleep Button (CM) [SLPB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver Non-volatile memory driver v1.2 input: /usr/sbin/thinkpad-keys as /class/input/input8 device eth1 entered promiscuous mode audit(1188964560.495:2): dev=eth1 prom=256 old_prom=0 auid=4294967295 eth1: no IPv6 routers present Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 [drm] Initialized i915 1.6.0 20060119 on minor 0